|Home||About Us||Services||Contact Us||FAQ|
Welcome to Mold Inspection Raleigh
Serving Raleigh and Surrounding Suburbs....
Advantages and DisadvantagesAdvantages
What are the advantages of tape-lift surface sampling?
Advantage over testing by culture method: The swab or tape lift method is analyzed by direct microscopy (same as air sampling). You do not need to grow the fungus in culture media to identify it. Thus, you are able to detect both the viable (living) and non-viable (dead) spores, both of which are important because mold spores continue to be allergenic and toxigenic even when dead (even after being treated with a disinfectant). Additionally, some types of mold grow much faster than other types. Slower-growers (like the black mold Stachybotrys) may be overgrown by molds that grow much more rapidly and thus may not be found by the culture technique. The method we use enables all spores in the sample to be observed.What if I suspect mold but cannot find it?
As opposed to air sampling: Air sampling gives you a snapshot view of what is in the air at the time of testing. Intermittent or past problems may not be found. Surface sampling gives you a picture of what has occurred in the past and over time.
As opposed to petri dishes or settle plates: Scientists of the American Conference of Governmental Industrial Hygienists say that settle plates do not collect airborne particles in a way that allows you to properly evaluate conditions. Particle settlement depends on the size (weight) of the particle size and also is influenced by air movement. Thus, settle plates cannot provide reliable measurements. This method is not even appropriate for determining the relative air concentrations of different microrganisms because of the collection bias.
Look where there has been previous water damage, where there is standing water, or where there is a lot of humidity. Visible mold growth can sometimes be found underneath materials where water has damaged surfaces or behind walls.How much mold can make me sick?
It depends. For some people, a relatively small number of mold spores can cause health problems. For other people, it may take much more. The basic rule is, if you can see or smell it, take steps to eliminate the excess moisture, and get it tested.What symptoms do molds commonly cause?
Mold can cause illness in several ways:Are some molds more hazardous than others?
Exposure to mold can irritate the eyes, nose, and upper breathing passages. Symptoms of irritation include burning eyes, nasal congestion, coughing, and post-nasal drip.
Many people become allergic to mold and develop hay fever or asthma symptoms such as itchy, watery eyes, nasal congestion, sneezing, chest tightness, cough and wheezing.
Some molds create chemicals, called toxins that can cause illness. While much remains unknown about mold toxins, it appears that some molds produce toxins that can have effects on the skin, the respiratory system, the immune system, and the nervous system.
Some molds can also cause infection, such as chronic sinus infections. Other types of mold-induced infection are much less common, and occur mainly among people with weakened immune systems. Examples of individuals with weakened immune systems include those with HIV infection, those receiving chemotherapy, and the elderly. Children and pregnant women may also be at increased risk.
Allergic persons vary in their sensitivities to mold, both as to amount and type needed to cause reactions. In addition, certain types of molds can produce toxins, called mycotoxins that the mold makes to inhibit or prevent the growth of other organisms. Mycotoxins are not always produced, and whether a mold produces mycotoxins while growing in a building depends on what the mold is growing on, conditions such as temperature, pH, humidity or other unknown factors. When mycotoxins are present, they occur in both living and dead mold spores and may be present in materials that have become contaminated with molds.What can I save? What should I toss?
In general, porous substances that are growing mold, such as paper, rags, wallboard, and rotten wood, should be bagged and thrown out. Harder materials such as glass, plastic, or metal can be kept after they are cleaned and disinfected.Can air duct systems become contaminated with mold?
Yes, air duct systems can become contaminated with mold, either by supporting mold growth inside (e.g., from a dirty or clogged air conditioning pan, due to over-humidification of system, etc.) or by being a means of circulating and distributing spores from one location to other parts of the home.Should I have my ducts cleaned?
That depends on the circumstances. The EPA guide "Should you Have the Air Ducts in Your Home Cleaned?" may help you to decide this or you may wish to consult a qualified environmental professional.. Do not run the heater or air conditioner if you know or suspect that it is contaminated with mold. Cleaning should be done by a NADCA certified duct cleaning service.I have mold in my basement but no one ever goes down there. Can this be problem?
Yes. It is possible that contaminants can enter small openings in the ventilation system and be distributed to other parts of the home.